The first step in putting a computer together is to round up all the parts you need. There are ten things you are going to have to have in order to make a functional computer. These parts are a mouse, monitor, keyboard, CPU, motherboard, power supply, case, hard drive, video card, and a floppy drive. On average you can save between $200 and $600 when you build your own computer. The reason for this is because if you use online computer manufacturing companies you can get computer hardware and software items cheap.

The next step is to find a place free of static electricity. If your motherboard gets shocked you will have a big paper weight or doorstop, whichever one is needed it

Now comes attaching everything to the motherboard. The big power cord coming off the power supply needs to be plugged into the middle of the motherboard where the 11 pin connector is located. Next the will need to be plug into the AGP (Accelerated Graphics Port) port it is a small sandwich looking connector. Next the most difficult part comes. The CPU, this is where you’ve got to be very careful. Take your CPU and lift the lever on the motherboard and gently place the CPU in the right position and slowly push down the lever.

This will clip in somewhere near the CPU. This is also something you must apply a lot of pressure. This will automatically snap in once you have pushed it in far enough. The only thing you really have left to install inside the computer is the floppy drive. Take the IDE cable that was given to you in the package of items that came with the floppy drive. Take the cable plug it into the motherboard and the other one in the back of the floppy drive. The power is going to come from the power supply. The cable you use is the 6 pin, second smallest power cord. Once this is installed all you have left to do is to install th

Some topics in this essay:
Graphics Port, Outside Computer, floppy drive, putting computer, power supply, video card, outside computer, steps putting computer, output device, own computer, operating system, motherboard power, left install,