(855) 4-ESSAYS

Type a new keyword(s) and press Enter to search

Barebones Computer- Construction Project


            
            
            
            
             An inventory was completed to ensure that all of the Construction Project components were accounted for prior to the start of the computer assembly. The following is a list of all the components that were ordered and inventoried:.
              1- Intel Celeron 1.8GHz Processor, 128K cache, 400 FSB, Socket 478 .
              2- Corsair Value Select 256MB, PC 2700 DDR, 333MHz.
              1- Seagate 40GB EIDE Hard Drive 5400/2MB/12.5/ATA-100.
              1- Ultra Aluminum Fan Socket 478 up to P4 2.8GHz.
              1- Benq 56X CD ROM, Internal, IDE, Beige.
              1- Intel D875PBZLK Socket 478 Motherboard.
              1- EZ Media Corporate Mid-Tower Case with 350W power supply.
             All of the items were accounted for. Next step of the project is to begin construction of the computer system in an area that is neat and orderly. .
             System Construction.
             Once the inventory was complete the case was removed from the box and inspected for damage. On of the plastic front panel standoffs were broken. The CD ROM drive was installed in the top bay and the hard drive was positioned in the bottom bay. Next, the CPU and fan were installed on the motherboard. Care was taken on this portion of the install for matters related to ESD (electrostatic discharge) by wearing a ground wrist strap. Once the CPU was placed into the socket and secured, the thermal compound was applied over its entirety. The fan/heatsink was placed on top of the CPU and was secured. There was a concern that it may not be attached tight enough. There was a small amount of movement. The fan clip is adjustable, but it was decided that if it was moved up to the next level it may have been too tight so it was left as is. There will be a consultation with the instructor about this matter before the system is powered up to avoid any heat damage to the CPU. Before the motherboard was placed into the case it was realized that the previously installed CD ROM drive needed to be moved lower. This was decided after it was realized that the ribbon cable that connects the two drives was too short.


Essays Related to Barebones Computer- Construction Project


Got a writing question? Ask our professional writer!
Submit My Question