... must meet specific criteria. The manufacturer must decide if they want oil or water based pepper spray and the desired heat intensity or pungency of the formula. They must also ensure that the active ingredients in the peppers remain evenly dispersed throughout their final product. So how are the three levels of ... ingredients must be added to obtain the desired pungency. To create level three oil based pepper spray the level two oil based formula must be mixed with strong industrial solvents to ensure even suspension of the active compounds. It will require approximately nineteen parts...

• Word Count: 583
• Approx Pages: 2

... trial two the specific heat capacity was found to be .113(cal)/(g Celsius) and for trial three the specific heat capacity was found to be .115 (cal)/(g Celsius). The same formula stated above was used but with different variables of initial water, final water, and mass variables. Next we calculated our average value of specific heat capacity by taking the sum ... of our three trials and dividing by three. The average was .111 (cal)/(g Celsius). The accepted value was .105 (cal)/(g Celsius). When taking the percent difference we used the formula (average-accepted)/(accepted) and came up ...

• Word Count: 1108
• Approx Pages: 4
• Grade Level: High School

... to 65-80% of our heart rate reserve, which also corresponds to 65-80% of our maximal oxygen consumption (V02max).The first formula calculates the target heart rate associated with 65% of your maximum heart rate reserve while the second formula calculates the target heart rate corresponding to 80% of your maximal heart rate reserve. a. (Maximal Heart Rate " Resting Heart Rate ... and monitoring your intensity. Be sure to remove yourself from the pool at the first onset of a muscle cramp. In the event of a muscle strain, you should apply the  RICE  formula immediately. Do not apply heat...

• Word Count: 10521
• Approx Pages: 42
• Grade Level: High School

... is higher than the stopper. 5. Turn the cylinder at an angle when you drop stopper so it doesn't splash. 6. Record the volume of the stopper. 7. Now by using the density formula D=m/v you will get the density. An example of finding the density of a liquid is to get a graduated cylinder and a triple beam balance. 1. Find the measure of the cylinder with the ... must subtract the weight of the cylinder from the weight you got with the water and the cylinder. 5. Now that you have the mass and the volume use the density formula D=m/v and that will give you the density. 6. You can also do th...

• Word Count: 461
• Approx Pages: 2
• Grade Level: High School

... mass and a graduated cylinder to find the volume of the substances, water, rubber stopper, Pepsi and diet Pepsi. Then we used the formula density= mass/volume to find each substances density. This lab shows the use of the density formula and helped improve measuring skills. We also used water displacement to find some volumes. Experimental Procedure Upon entering the lab safety goggles ... ...

• Word Count: 481
• Approx Pages: 2
• Grade Level: High School

... shovel your own failure down your throat as you soak your fork in your worthless tears. How sad. The best thing you can do is follow the nationally-certified Matt Formula which goes as follows. Fill your pan up about halfway to three quarters with water. This is not the most important step, so don't treat it as such. Next, you ... ...

• Word Count: 1218
• Approx Pages: 5
• Grade Level: High School

... into a cup filled with the second solution for that pair. 5. Weigh the cell after 30 minutes and record the initial weight. 6. Calculate the percent change in weight using the following formula: (initial / initial)/initial X 100. Record your results. Results: At the end of the experiment, it is evident that the solutions either loss water or gained water. When we took the ... ...

• Word Count: 2017
• Approx Pages: 8
• Grade Level: High School

... proceed to rub shampoo on the dog. Be sure to work up a good lather and get their backsides, folds, and wrinkles cleaned well. We use Paul Mitchell hypoallergenic oatmeal puppy formula on our bulldogs. It rinses out easily and keeps their skin moisturized and coat soft and shinny. It also makes them smell like oatmeal cookies. When you are finished bathing ... ...

• Word Count: 2517
• Approx Pages: 10
• Grade Level: High School

... get. The more time water has been in your house pipes, the more lead it may contain. Only use cold water tap for drinking, cooking, and especially for making baby formula. Hot water is likely to contain higher levels of lead. Lead poisoning can be caused by lead fishing sinkers too. So it is encouraged not to use lead sinkers or ... ...

• Word Count: 299
• Approx Pages: 1
• Grade Level: High School

... ? Calculate the mass of the CO2 in the flask? Calculate the molar mass of CO2 using the ideal gas law? Calculate the accepted molar mass of CO2 from its molecular formula? Calculate the error? Calculate the percent error? Equations Calcium Carbonate + hydrochloric Acid à carbon dioxide + water + calcium chloride CaCO3 + 2HCl à CO2 + H2O + CaCl2 Questions & Problems 1. Another definition of molar mass of ... ...

• Word Count: 813
• Approx Pages: 3
• Grade Level: High School

... 1 milliliter of .01 M thiosulphate solution is equal to .056 milliliters of oxygen. The final step would be to calculate the concentration of oxygen per liter of water using the following formula: oxygen=(.056y1000)/50 y is the amount of thiosulphate used. The much easier and far less complicated way to find the amount of dissolved oxygen in a sample of water would be ... ...

• Word Count: 681
• Approx Pages: 3
• Grade Level: High School

... be determined by setting up a ratio between the drops (volumes) of EDTA and the ions and equating it to the ratio of the concentrations of the two. This is the formula you should use in order to find the unknown titration: CEDTA VEDTA = CIONS VIONS -Example of calculation 1 -(2.00 x 10-4 M) x 14 drops = CIONS x 1 drop CIONS = .0028 M Since the concentration of the ... ...

• Word Count: 2264
• Approx Pages: 9
• Grade Level: High School

... . Data shows that fertilizer does help in the speed of growth and height of plants. (www.fertilizer.com) According to the information shown on this website, fertilizer acts like a growth formula for plants. Purpose: The affects of Liquid Fertilizer on the optimal growth of plants. This experiment examines the affects of fertilizer on the plants, and if the fertilizer does or ... ...

• Word Count: 782
• Approx Pages: 3
• Grade Level: High School

... fixed is gross production (GP), RsA is the energy used in the respiration of the autotrophic plant, and the amount of energy left over is net production (NP). The second formula is distinction between a "successional" or developmental ecosystem and "climax". In the successional system the total respiration is less than the gross production, leaving energy (NEP) that is built into stucture ... ...

• Word Count: 711
• Approx Pages: 3
• Grade Level: Undergraduate

... change for the equation above. MgSO4 + H2O =  Mg2+ + SO42- + H2O MgSO4•7H2O + H2O =  Mg2+ + SO42- + 7H2O + H2O To determine the change in enthalpy of each equation, we use the formula: ∆H=m.s.∆T, where ∆H is the change in enthalpy (measured in Joules per unit mass - eg. joules per 15.5 grams), m is the mass of either the anhydrous or hydrated magnesium ... ...

• Word Count: 1341
• Approx Pages: 5
• Grade Level: High School